How do you print it?

A living cheat-sheet of nozzle & bed temperatures, speeds, densities and tolerances for every Filament Nexus material. Bookmark it — and always dry filled nylons before printing.

Material	Nozzle	Bed	Speed	Density	Tensile	HDT	Tolerance	Price
PLA ProDry	190–-220°C	50–-60°C	40–-80 mm/s	1.24 g/cm³	60 MPa	55°C	±0.02mm	$22.99
PLA+ Enhanced	200–-230°C	50–-65°C	40–-90 mm/s	1.23 g/cm³	65 MPa	52°C	±0.02mm	$26.99
ABS Pro	220–-250°C	90–-110°C	30–-60 mm/s	1.04 g/cm³	42 MPa	98°C	±0.03mm	$21.99
PETG Clear	230–-250°C	70–-85°C	40–-60 mm/s	1.27 g/cm³	53 MPa	70°C	±0.03mm	$24.99
TPU Flex	210–-235°C	45–-60°C	20–-40 mm/s	1.21 g/cm³	35 MPa	55°C	±0.05mm	$32.99
Carbon Fiber PLA	200–-230°C	50–-60°C	30–-60 mm/s	1.3 g/cm³	52 MPa	58°C	±0.03mm	$36.99
Silk PLA	195–-220°C	50–-60°C	40–-60 mm/s	1.25 g/cm³	45 MPa	50°C	±0.03mm	$24.99
Glow-in-Dark PLA	190–-220°C	50–-60°C	30–-50 mm/s	1.26 g/cm³	42 MPa	48°C	±0.04mm	$27.99
Wood PLA	190–-220°C	50–-60°C	30–-50 mm/s	1.18 g/cm³	35 MPa	48°C	±0.05mm	$24.99
ASA Pro	240–-260°C	90–-110°C	30–-60 mm/s	1.07 g/cm³	43 MPa	95°C	±0.03mm	$32.99
Nylon PA6Dry	240–-270°C	70–-90°C	30–-50 mm/s	1.14 g/cm³	66 MPa	80°C	±0.04mm	$42.99
Polycarbonate Blend	260–-290°C	100–-120°C	30–-50 mm/s	1.2 g/cm³	62 MPa	110°C	±0.03mm	$49.99
Metal-Filled PLA	195–-220°C	45–-60°C	25–-40 mm/s	2.4 g/cm³	30 MPa	50°C	±0.05mm	$44.99
Marble PLA	190–-220°C	50–-60°C	40–-60 mm/s	1.28 g/cm³	38 MPa	48°C	±0.03mm	$25.99
PETG-CF	240–-270°C	80–-95°C	30–-50 mm/s	1.35 g/cm³	48 MPa	78°C	±0.03mm	$42.99
Thermochromic PLA	190–-215°C	45–-60°C	35–-60 mm/s	1.24 g/cm³	42 MPa	50°C	±0.03mm	$28.99
PLA Aero	190–-220°C	50–-60°C	40–-80 mm/s	0.8 g/cm³	28 MPa	50°C	±0.05mm	$34.99
ASA Aero	240–-260°C	90–-110°C	40–-80 mm/s	0.72 g/cm³	30 MPa	88°C	±0.05mm	$42.99
TPU for AMS	220–-240°C	45–-60°C	40–-100 mm/s	1.18 g/cm³	42 MPa	60°C	±0.04mm	$38.99
PPS-CFDry	310–-340°C	120–-140°C	30–-50 mm/s	1.45 g/cm³	120 MPa	260°C	±0.03mm	$149.99
PPA-CFDry	280–-310°C	100–-120°C	40–-60 mm/s	1.28 g/cm³	110 MPa	180°C	±0.02mm	$79.99
PAHT-CFDry	280–-310°C	100–-120°C	35–-55 mm/s	1.32 g/cm³	95 MPa	180°C	±0.03mm	$69.99
PA6-CFDry	270–-300°C	90–-110°C	35–-55 mm/s	1.25 g/cm³	90 MPa	130°C	±0.03mm	$59.99
ASA-CF	250–-275°C	95–-110°C	30–-55 mm/s	1.15 g/cm³	55 MPa	98°C	±0.03mm	$49.99
PET-CFDry	255–-280°C	75–-90°C	35–-60 mm/s	1.38 g/cm³	58 MPa	85°C	±0.03mm	$45.99
ABS-GFDry	235–-260°C	95–-110°C	30–-55 mm/s	1.15 g/cm³	52 MPa	102°C	±0.03mm	$35.99
PA6-GFDry	260–-290°C	85–-105°C	35–-55 mm/s	1.3 g/cm³	80 MPa	125°C	±0.03mm	$49.99

Temperatures are starting points — always tune per spool with a temperature tower. HDT = heat deflection temperature. “Dry” flags materials that absorb moisture and should be dried (e.g. 80°C for nylon, 100°C for PPA-CF) before printing for best results.